[Mar-2022] DES-1221 Exam Dumps - Free Demo 365 Day Updates Free Sales Ending Soon - Use Real DES-1221 PDF Questions Study Guides for DES-1221 Exam There are official PDF guides and technical whitepapers that provide coverage on differing features of PowerStore and help one get ready for DES-1221 test. One of them is the “Dell EMC PowerStore: Introduction to the Platform” material that targets storage [...]

[Mar-2022] DES-1221 Exam Dumps - Free Demo & 365 Day Updates [Q23-Q40]

Share

[Mar-2022] DES-1221 Exam Dumps - Free Demo & 365 Day Updates

Free Sales Ending Soon - Use Real DES-1221 PDF Questions


Study Guides for DES-1221 Exam

There are official PDF guides and technical whitepapers that provide coverage on differing features of PowerStore and help one get ready for DES-1221 test. One of them is the “Dell EMC PowerStore: Introduction to the Platform” material that targets storage architects, IT administrators, and Dell employees and partners. Also, those doing evaluation, acquisition, management, operation, or designing of Dell networked storage surroundings while using PowerStore systems can undergo it. This small document contains PowerStore overview, hardware overview, PowerStore models, and more.

Another helpful resource to guide you during preparation for DES-1221 is the “Best Practices Guide” also created by Dell Technologies. It captures the most updated techniques and tips applied during the installation and configuration of the PowerStore systems to enable performance as well as availability at the optimal level.

 

NEW QUESTION 23
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?

  • A. Performance
  • B. Replication
  • C. Protection
  • D. Remote

Answer: C

 

NEW QUESTION 24
A protection policy with snapshot and replication rules is applied to a file system. What is the result?

  • A. Both replication and snapshot rules get applied
  • B. Applying the protection policy to the file system fails
  • C. Snapshot rules get ignored and only replication rules get applied
  • D. Replication rules get ignored and only snapshot rules get applied

Answer: A

 

NEW QUESTION 25
Which type of network is used for storage migration between appliances?

  • A. Inter-node network
  • B. Intra-Cluster Management network
  • C. Storage network
  • D. Intra-Cluster Data network

Answer: D

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/powerstore-t-model- appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b&lang=en-us

 

NEW QUESTION 26
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?

  • A. Use the VNX2 SP ping operation
  • B. Verify host initiators on PowerStore Manager
  • C. Examine Fibre Channel zoning
  • D. Review Server Manager MPIO properties

Answer: A

 

NEW QUESTION 27
Which type of network is used for storage migration between appliances?

  • A. Inter-node network
  • B. Intra-Cluster Data network
  • C. Intra-Cluster Management network
  • D. Storage network

Answer: C

Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/powerstore-t-model- appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b&lang=en-us

 

NEW QUESTION 28
What describes the Import External Storage feature?

  • A. A native data migration feature of PowerStore that imports external block storage to PowerStore
  • B. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
  • C. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
  • D. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation

Answer: A

Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5

 

NEW QUESTION 29
A storage administrator has provisioned 10 * 2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?

  • A. 5:1
  • B. 3:1
  • C. 4:1
  • D. 6:1

Answer: A

 

NEW QUESTION 30
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports. What is the correct response?

  • A. "A" ports are input ports and "B" ports are output ports
  • B. All ports on the base enclosure are input ports
  • C. "A" ports are output ports and "B" ports are input ports
  • D. All ports on the base enclosure are output ports

Answer: C

 

NEW QUESTION 31
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?

  • A. Status: Term-Based, Type: Unlimited
  • B. Status: Perpetual, Type: Open
  • C. Type: Term-Based, Status: Active
  • D. Type: Perpetual, Status: Active

Answer: D

Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of-rack- tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfb&lang=en-us

 

NEW QUESTION 32
What does the remote replication Failover operation do?

  • A. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
  • B. Fully synchronizes the source and destination data states and stops the current replication session
  • C. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
  • D. Fully synchronizes the source and destination data states and reverses the replication direction

Answer: C

 

NEW QUESTION 33
In a PowerStore T source cluster, create a 100GB volume with name "Prod_vol" and set a protection policy to replicate the volume with RPO 30 minutes to a destination cluster. The destination cluster is already configured. When you have finished using the simulator, click Next.

Answer:

Explanation:
Below are the exhibits solution for this simulation.















 

NEW QUESTION 34
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?

  • A. Manually added from vCenter server using add storage provider option
  • B. VASA is unsupported in PowerStore X models
  • C. Automatically added during Initial Configuration
  • D. Built into the PowerStore X system code

Answer: C

 

NEW QUESTION 35
What is the significance of the warning given when a volume with data services is deleted?

  • A. Volume is mapped to a host
  • B. Volume is participating in a migration
  • C. Snapshot is present on the volume
  • D. Protection policy is configured on the volume

Answer: C

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/delete-a-volume?
guid=guid-26e8c12d-a3df-4d4d-8012-ae2ef9e53721&lang=en-us

 

NEW QUESTION 36
What does the data import session Pause operation do?

  • A. Deactivates the host to PowerStore control path
  • B. Stops the source to PowerStore cutover operation
  • C. Stops the source to PowerStore background copy operation
  • D. Deactivates the host to PowerStore data path

Answer: C

 

NEW QUESTION 37
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?

  • A. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
  • B. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
  • C. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
  • D. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster

Answer: C

 

NEW QUESTION 38
What is the correct power up sequence for a PowerStore?

  • A. 1. Base Enclosure Node A, 2. Base Enclosure Node B, 3. Expansion Enclosure
  • B. 1. Base Enclosure Node B, 2. Base Enclosure Node A, 3. Expansion Enclosure
  • C. 1. Expansion Enclosure, 2. Base Enclosure
  • D. 1. Base Enclosure, 2. Expansion Enclosure

Answer: D

 

NEW QUESTION 39
What does the remote replication Failover operation do?

  • A. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
  • B. Fully synchronizes the source and destination data states and stops the current replication session
  • C. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
  • D. Fully synchronizes the source and destination data states and reverses the replication direction

Answer: C

 

NEW QUESTION 40
......


The Dell DES-1221 test is for those who want to acquire the Specialist – Implementation Engineer, PowerStore Solutions Version 1.0 certificate. It mostly targets individuals who are responsible for the execution and administration of storage arrays for PowerStore in environments for open systems.

 

DES-1221 Dumps - Pass Your Certification Exam: https://www.braindumpsvce.com/DES-1221_exam-dumps-torrent.html

Latest Real EMC DES-1221 Exam Dumps Questions: https://drive.google.com/open?id=1MDA1nyzlsDucS7bCg4s-bv28s_1YNDBy