Easily To Pass New EMC DES-1221 Dumps with 62 Questions
Latest DES-1221 Study Guides 2021 - With Test Engine PDF
Understanding functional and technical aspects of Specialist â Implementation Engineer, PowerStore Solutions Version 1.0 PowerStore Software and Hardware upgrades (7%)
The following will be discussed in DELL DES-1221 dumps:
- Add an appliance into a cluster
- Describe and perform PowerStore software upgrade
- Add drives to a PowerStore appliance
- Add an expansion shelve to a PowerStore appliance
The benefit in Obtaining the Specialist â Implementation Engineer, PowerStore Solutions Version 1.0
Getting this certification can:
- Differentiate yourself in a market clamoring for skilled professionals
- Boost your productivity (and your free time in the process)
- Move from individual contributor to strategic technology advisor in your organization
- Take advantage of exclusive benefits aimed to make your job easier
- Increase your confidence and build credibility
For more info about Specialist â Implementation Engineer, PowerStore Solutions Version 1.0
NEW QUESTION 14
Use the simulator to generate and download logs from all appliances in the PowerStore cluster. When you have finished using the simulator, Click Next.
Answer:
Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.
NEW QUESTION 15
An administrator assigns a protection policy to a volume group. Volume1, Volume2, Volume3 are put into the volume group. Later it is decided that Volume2 should be replicated at a different time. Volume2 is removed from the volume group. The administrator attempts to assign a new protection policy to Volume2 and the option is greyed out.
Why is the option greyed out?
- A. Still has associated Volume-Group snapshots
- B. Requires a snapshot rule and a replication rule
- C. Requires a replication rule not a protection policy
- D. Already has a protection policy from the Volume-Group
Answer: A
NEW QUESTION 16
A storage administrator has provisioned 10*2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?
- A. 4:1
- B. 3:1
- C. 6:1
- D. 5:1
Answer: C
NEW QUESTION 17
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.
Answer:
Explanation:
Below are the exhibits solution for this simulation.
NEW QUESTION 18
A storage administrator has configured the addition of a VNX2 as a remote system for migration.
Which Import External Storage migration feature architectural components are now established?
- A. Host Fibre Channel initiators are registered on the VNX2 storage system
- B. Data path and management control path to the source storage system
- C. Host iSCSI initiators are registered on the VNX2 storage system
- D. Data path and management control path to the access host
Answer: A
NEW QUESTION 19
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?
- A. Automatically added during Initial Configuration
- B. Built into the PowerStore X system code
- C. Manually added from vCenter server using add storage provider option
- D. VASA is unsupported in PowerStore X models
Answer: C
NEW QUESTION 20
Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?
- A. VAAI
- B. SOAP
- C. REST
- D. VASA
Answer: D
Explanation:
Explanation
VASA is a VMware-defined API meant to provide a common way for VMware to integrate with storage vendors. The API is implemented using an out-of-band, Simple Object Access Protocol (SOAP) over HTTPS.
Reference: https://volumes.blog/2020/05/06/what-is-powerstore-part-4-vvols/
NEW QUESTION 21
Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
Simulator:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 22
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Thin clone 1 becomes parent
- B. Snapshot 3 becomes the parent
- C. Thin clone 3 has an empty parent
- D. Thin clone 3 becomes parent
Answer: C
NEW QUESTION 23
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
- A. UDS
- B. LDAP
- C. NIS
- D. NTP
Answer: D
NEW QUESTION 24
What is the significance of the warning given when a volume with data services is deleted?
- A. Snapshot is present on the volume
- B. Volume is mapped to a host
- C. Volume is participating in a migration
- D. Protection policy is configured on the volume
Answer: C
NEW QUESTION 25
A VM administrator uses their PowerStore user account and noticed they are unable to change their password. Why?
- A. Validate user in Active Directory not set
- B. Extended schema for Unix users in Active Directory not set
- C. In settings > users: enable allow user to change password not set
- D. VM Administrator role cannot set password
Answer: D
NEW QUESTION 26
A protection policy with snapshot and replication rules is applied to a file system. What is the result?
- A. Replication rules get ignored and only snapshot rules get applied
- B. Applying the protection policy to the file system fails
- C. Snapshot rules get ignored and only replication rules get applied
- D. Both replication and snapshot rules get applied
Answer: D
NEW QUESTION 27
A customer wants to add capacity to their PowerStore 5000T. The system is populated with 6 NVMe SCM
750 GB drives. What is the maximum number and type of drives that can be added to the base enclosure?
- A. 15 NVMe SSD
- B. 17 NVMe SCM
- C. 15 NVMe SCM
- D. 17 NVMe SSD
Answer: C
NEW QUESTION 28
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
- A. UDS
- B. NTP
- C. LDAP
- D. SMB
Answer: D
NEW QUESTION 29
At what point in the configuration of an External Storage Import session does the data path from the host to the PowerStore system become the active IO path?
- A. As MPIO restarts on the host
- B. Before launching the Import Storage wizard
- C. During the ImportKit installation
- D. When the import session begins
Answer: D
NEW QUESTION 30
What is the significance of the warning given when a volume with data services is deleted?
- A. Snapshot is present on the volume
- B. Volume is mapped to a host
- C. Volume is participating in a migration
- D. Protection policy is configured on the volume
Answer: C
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/delete-a-volume?
guid=guid-26e8c12d-a3df-4d4d-8012-ae2ef9e53721&lang=en-us
NEW QUESTION 31
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Thin clone 1 becomes parent
- B. Snapshot 3 becomes the parent
- C. Thin clone 3 has an empty parent
- D. Thin clone 3 becomes parent
Answer: C
Explanation:
Explanation/Reference: https://www.delltechnologies.com/en-us/documentation/unity-family/unity-p-config-luns/03- configuring-block-thin-clones.htm
NEW QUESTION 32
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?
- A. Review Server Manager MPIO properties
- B. Use the VNX2 SP ping operation
- C. Verify host initiators on PowerStore Manager
- D. Examine Fibre Channel zoning
Answer: B
NEW QUESTION 33
A storage administrator has provisioned 10 x 2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?
- A. 4:1
- B. 3:1
- C. 6:1
- D. 5:1
Answer: C
NEW QUESTION 34
Refer to the Exhibit.
Note the yellow arrow. A Data Center Engineer notices that the LED is blinking blue and amber alternating at one second intervals. What does this indicate?
- A. System is booting
- B. Node in Service Mode
- C. Node is Degraded
- D. System not initialized
Answer: B
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/embedded-module-leds?
guid=guid-bc07892c-75cf-43b6-8f17-8a4c49001aeb&lang=en-us
NEW QUESTION 35
When planning rack layout, why should base enclosures be grouped together?
- A. Hot aisle requirement
- B. Power distribution requirements
- C. Rack weight balance
- D. Ease of cable management
Answer: B
NEW QUESTION 36
What does the remote replication Failover operation do?
- A. Fully synchronizes the source and destination data states and reverses the replication direction
- B. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
- C. Fully synchronizes the source and destination data states and stops the current replication session
- D. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
Answer: D
NEW QUESTION 37
......
DES-1221 Dumps and Exam Test Engine: https://www.braindumpsvce.com/DES-1221_exam-dumps-torrent.html
Get New DES-1221 Practice Test Questions Answers : https://drive.google.com/open?id=1MDA1nyzlsDucS7bCg4s-bv28s_1YNDBy