350-601 100% Pass Guaranteed Download CCNP Data Center Exam PDF Q&A
350-601 Practice Test Dumps with 100% Passing Guarantee
NEW QUESTION # 156
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. NX-OS JSON-RPC
- B. NX-API Sandbox
- C. Guest Shell for NX-OS
- D. Open NX-OS
Answer: B
NEW QUESTION # 157
Due to new regulatory requirements from a third party, organization ABC must enable two-factor authentication for the Cisco UCS environment. The requirement is also to provide redundancy if the authentication server goes offline. Which three authentication components must be enabled to meet this requirement? (Choose three.)
- A. authentication domain
- B. TACACS+
- C. LDAP
- D. local
- E. provider group
Answer: A,B,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem
NEW QUESTION # 158
A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: D
Explanation:
The command write memory is not valid in NX-OS
The "event-default"
NEW QUESTION # 159
Refer to the exhibit.
Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?
- A. ('fusion-config_') + date
- B. str.('fusion-config_') + date
- C. ('fusion-config_ + date')
- D. string(('fusion-config_') + date)
Answer: B
NEW QUESTION # 160
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION # 161
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: D
Explanation:
NEW QUESTION # 162 
Refer to the exhibit. Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 multicast address
- B. IPv4 anycast address
- C. IPv4 gateway address
- D. IPv4 unicast address
Answer: A
Explanation:
Section: Network
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/ FabricManager/cfs.pdf
NEW QUESTION # 163
Refer to the exhibit.
An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?
- A. Common/Global
- B. Fabric B
- C. FC Zoning Enabled
- D. Fabric A
Answer: D
NEW QUESTION # 164
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
- A. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
- B. The destination port for monitoring must be an unassigned Fibre Channel port.
- C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
- D. Fibre Channel traffic is monitored only on one vHBA per server.
Answer: D
Explanation:
Section: Storage Network
NEW QUESTION # 165
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. History Count
- B. Change Count
- C. Change Interval
- D. No Change Interval
Answer: A
NEW QUESTION # 166
Refer to the exhibit.
Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?
- A. ('fusion-config_') + date
- B. str.('fusion-config_') + date
- C. ('fusion-config_ + date')
- D. string(('fusion-config_') + date)
Answer: B
NEW QUESTION # 167
An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.
Answer:
Explanation:
NEW QUESTION # 168
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
NEW QUESTION # 169
Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 series Switch are true? (Choose two.)
- A. Modules must be online to be upgraded.
- B. The Upgrade process disrupts only the module that is being upgraded.
- C. The active supervisor can be upgraded.
- D. The upgrade can be performed from the standby supervisor module.
- E. If an upgrade is interrupted, the upgrade continues after a connection is restored.
Answer: A,B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/release_notes/epld/epld_rn_8x.htm
NEW QUESTION # 170
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 171
An engineer must connect a Cisco UCS appliance port directly to NFS and iSCSI storage devices. Which action should be taken to achieve this goal?
- A. Configure VLAN tagging on the storage and the Cisco UCS simultaneously.
- B. Configure the appliance ports in trunk mode and apply VLAN tagging on the storage
- C. Configure the appliance ports m access mode and apply VLAN tagging on the storage
- D. Configure NFS and iSCSI to use the same VLAN tag on the appliance port
Answer: B
NEW QUESTION # 172
An engineer must migrate a Cisco UCS C-Series server from Cisco SingleConnect to direct integration mode.
The Cisco UCS Manager Rack Server Discovery Policy and Rack Management Connection Policy are set to immediate and Auto-Acknowledge. Which set of steps accomplishes this task?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 173
An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer. The engineer must keep these considerations in mind:
* The customer's environment is based on industry-accepted standards and requires a solution that meets these standards.
* The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.
* The solution must be based on a human-readable and easy to parse format such as XML or JSON.
Which solution must be used to meet these requirements?
- A. SNMP
- B. REST API
- C. NETCONF
- D. Ansible
Answer: C
Explanation:
Explanation
Please confirm with colleagues.
NEW QUESTION # 174
A storage array must be connected to port ethernet1/10 on a Cisco MDS 9000 Series Switch In addition, the array must connect using the FCoE protocol and be single-homed Which configuration meets these requirements?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 175
A network engineer must restore the running configuration on a Cisco Nexus 5000 Series Switch to an existing snapshot called "stable1". The restore procedure should proceed only if no errors occur. Which configuration should be used to accomplish this goal?
- A. rollback running-config checkpoint stable1 best-effort
- B. rollback checkpoint stable1 best-effort running-config best-effort
- C. rollback checkpoint stable1 best-effort running-config atomic
- D. rollback running-config checkpoint stable1 atomic
Answer: D
NEW QUESTION # 176
......
350-601 PDF Dumps Are Helpful To produce Your Dreams Correct QA's: https://www.braindumpsvce.com/350-601_exam-dumps-torrent.html
New 350-601 exam Free Sample Questions to Practice: https://drive.google.com/open?id=159qeAjJg5BSc_w3lGAFfDIPxf5EOBIIZ