100% Pass Guaranteed Accurate 350-601 Answers 365 Days Free Updates
350-601 DUMPS Q&As with Explanations Verified & Correct Answers
Cisco 350-601 exam is an essential certification for IT professionals who are involved in designing, implementing, and managing data center infrastructure. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is highly valued by employers worldwide and can open up many career opportunities in the IT industry. Candidates who pass 350-601 exam will have demonstrated their mastery of the core data center technologies and will be ready to take on more advanced roles in their organization.
How to book the Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam
These are the following steps for registering for the 350-601 exam test:
- Step 1: Visit to 350-601 exam registration
- Step 2: Sign up/log in to the Pearson VUE account
- Step 3: Search for 350-601 Certifications Exam
- Step 4: Select Date, time and confirm with a payment method
NEW QUESTION # 101
An engineer must add a new VRF (DC DC) to the network that runs with Multiprotocol Border Gateway Protocol (MP-BGP) and EVPN.The requirement for the new VRF is to allow communication of network prefixes between PE1 and PE2. Which two sets of steps should be taken to complete the VRF configuration?
(Choose two)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
- E. Option E
Answer: B,E
NEW QUESTION # 102 
Refer to the exhibit. An engineer must monitor the Ethernet port and the corresponding VLAN traffic for the hyper4 device The SW3 device is a Cisco Nexus 7000 Series Switch Drag and drop the code snippets from the right into the boxes in the configuration to meet these requirements.
Answer:
Explanation:
Explanation
Graphical user interface Description automatically generated
NEW QUESTION # 103 
Refer to the exhibit A network administrator experiences these issues with the network:
* PC1 is experiencing a buffering problem for video applications
* The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?
.
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 104
A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources. Drag and drop the descriptions from the left onto the appropriate.
Answer:
Explanation:
Explanation
Private Cloud: owned, managed, and operated by a single organization.
Community Cloud: Owned, managed, and operated by one or more organizations or teams.
Public Cloud: Provisioned for open use.
Hybrid Cloud: At least two or more separate cloud infrastructures are connected together to facilitate hosted data and application portability.
NEW QUESTION # 105
An engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch event manager applet Backup-config event timer watchdog time 1800 name timer event cli match "copy running-config startup-config" What is the result of applying this configuration?
- A. It executes the copy running-config startup-confing command.
- B. It generates an error because no action is mentioned.
- C. It blocks the copy running-config startup-config command.
- D. It saves the running configuration every 1800 seconds.
Answer: B
Explanation:
Section: Automation
NEW QUESTION # 106
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. board controller
- B. IOMs
- C. Cisco UCS Manager
- D. BIOS
- E. adapters
Answer: B,C
NEW QUESTION # 107
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 108
A network engineer is configuring the Cisco UCS service profile template with Ansible using this code.
Which attribute must be used to apply the iSCSI initiator identifiers to all iSCSI vNICs for the service profiles derived from the service template?
- A. lan_connectivrty_policy
- B. boot_policy
- C. iqn_pool
- D. san_connectivity_policy
Answer: C
NEW QUESTION # 109
Refer to the exhibit.
What is configured as a result of running these commands?
- A. loose unicast RPF
- B. reverse lookup for outbound packets
- C. IP Source Guard
- D. strict unicast RPF
Answer: D
NEW QUESTION # 110
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)
- A. SMTP reply-to-address
- B. SMTP servers
- C. DNS servers
- D. syslog redirection
- E. NTP servers
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_gui_cisco_intergight_management.html
NEW QUESTION # 111
Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?
- A. to an additional server with network access to HyperFlex Edge
- B. to the HyperFlex Edge two-node cluster
- C. to Cisco Intersight
- D. to a third-party cloud provider
Answer: C
NEW QUESTION # 112
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
Explanation
prevent unauthorized - fabric binding.
Uses the exchange fabric membership- fabric binding
Can be distributed - port security
Allows a preconfigured - port security
NEW QUESTION # 113
Which mroute state is created when Bidirectional PIM is deployed at a site?
- A. MVPN Type-6
- B. S,G
- C. *,G
- D. MVPN Type-7
Answer: C
Explanation:
Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. PIM Sparse mode RP builds 2 entries *, G and S, G but when we use PIM bidirectional mode, the RP will never build a S,G entry and, it only allow the *,G entry. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/imc-tech-oview.html and https://networklessons.com/multicast/multicast-bidirectional-pim
NEW QUESTION # 114
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated.
What is wrong with the implementation?
- A. Zones must have the same name on both MDS switches for the E Ports to function.
- B. Different zone set names must be configured on both MDS switches.
- C. Zones are local to the MDS switch and name service must be used to activate the connection between E Ports.
- D. E Ports on both MDS switches must be configured as F Ports for the zoning to function.
Answer: C
NEW QUESTION # 115
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 116
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)
- A. SMTP reply-to-address
- B. SMTP servers
- C. DNS servers
- D. syslog redirection
- E. NTP servers
Answer: C,E
Explanation:
Explanation
NEW QUESTION # 117
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 118
What happens to the default host firmware policy after a Cisco UCS Manager upgrade?
- A. It is assigned to all the service profiles that include a host firmware policy.
- B. It is set to match the host firmware policy.
- C. It is updated to contain the firmware entries of all the components.
- D. It is replaced by a new default policy without any firmware entries.
Answer: A
Explanation:
Section: Compute
NEW QUESTION # 119
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION # 120
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 121
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The switch queries the TACACS+ server by using an encrypted text PAP login.
- B. The switch queries the TACACS+ server by using a clear text PAP login.
- C. The TACACS+ server uses the type-6 encrypted format.
- D. The timeout value on the TACACS+ server is 10 seconds.
Answer: D
Explanation:
Section: Security
NEW QUESTION # 122
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. Option A
- B. Option C
- C. Option B
- D. Option E
- E. Option D
Answer: A,D
NEW QUESTION # 123
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The switch queries the TACACS+ server by using a clear text PAP login.
- B. The timeout value on the TACACS+ server is 10 seconds.
- C. The TACACS+ server uses the type-6 encrypted format.
- D. The switch queries the TACACS+ server by using an encrypted text PAP login.
Answer: D
Explanation:
tacacs-server key
To configure a global TACACS+ shared secret key, use the tacacs-server key command. To remove a configured shared secret, use the no form of this command.
tacacs-server key [0 | 7] shared-secret
Syntax Description
7 (Optional) Configures a preshared key specified in encrypted text to authenticate communication between the TACACS+ client and server.
NEW QUESTION # 124
......
Cisco 350-601 exam covers a wide range of topics related to data center technologies, including network, compute, storage, and security. Candidates are required to demonstrate their understanding of various concepts such as data center network architecture, virtualization, automation, storage networking, and security.
350-601 dumps Exam Material with 455 Questions: https://www.braindumpsvce.com/350-601_exam-dumps-torrent.html
350-601 Questions and Answers Guarantee you Oass the Test Easily: https://drive.google.com/open?id=1W5eiAz0JYmizXRi3K5HGWvj598RmGCCF