Updated Jul-2023 Test Engine to Practice 300-610 Test Questions 300-610 Real Exam Questions Test Engine Dumps Training With 206 Questions The Cisco 300-610 exam tests the candidates' knowledge and skills in various areas, including data center infrastructure design, data center automation, data center storage networking, and data center compute networking. 300-610 exam also tests the candidates' knowledge [...]

Updated Jul-2023 Test Engine to Practice 300-610 Test Questions [Q29-Q53]

Share

Updated Jul-2023 Test Engine to Practice 300-610 Test Questions

300-610 Real Exam Questions Test Engine Dumps Training With 206 Questions


The Cisco 300-610 exam tests the candidates' knowledge and skills in various areas, including data center infrastructure design, data center automation, data center storage networking, and data center compute networking. 300-610 exam also tests the candidates' knowledge and skills in designing and deploying Cisco ACI, Cisco UCS, and Cisco HyperFlex solutions.


Cisco 300-610 exam is designed for IT professionals who have experience in data center technologies and want to advance their careers in data center design. 300-610 exam covers a wide range of topics, including data center network design, storage networking, data center compute connectivity design, and data center virtualization. 300-610 exam also covers the latest trends and technologies in data center design, such as Cisco Application Centric Infrastructure (ACI) and Cisco Unified Computing System (UCS).


Cisco 300-610 exam is part of the CCNP Data Center certification track. Designing Cisco Data Center Infrastructure certification is designed for professionals who want to prove their expertise in data center technologies and solutions. Designing Cisco Data Center Infrastructure certification track consists of four exams, including the Cisco 300-610 exam, and is designed to validate the skills required for data center infrastructure design, implementation, and management.

 

NEW QUESTION # 29
Refer to the exhibit In this scenario a Cisco engineer is building a loop-free topology where a dedicated layer of the vPC domain adjacent to the aggregation layer which also runs vPC Is used to interconnect the two data centers together. The engineer globally configures a vPC domain identifier on both vPC devices where the domain ID is the same on both peer devices. Which action successfully forms the domain?

  • A. Synchronize the MAC addresses for the member ports
  • B. Put peer device interfaces into a suspended state.
  • C. Configure vPC-peer-keepalive link on both peer devices
  • D. Enable and reuse an ISL Layer 3 trunk port channel

Answer: C


NEW QUESTION # 30
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

  • A. IPsec
  • B. L2TPv2
  • C. MACsec
  • D. L2TPv3

Answer: C

Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf


NEW QUESTION # 31
Which address pool is used when a vHBA template is created?

  • A. MAC
  • B. IP
  • C. UUID
  • D. WWPN

Answer: D

Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/ b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html


NEW QUESTION # 32
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

  • A. Embedded RP
  • B. Phantom RP
  • C. MSDP
  • D. PIM anycast RP

Answer: D


NEW QUESTION # 33
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network devices and servers. The company servers already have been security-hardened and must not have any additional software installed on them. The security policy mandates the use of a secure communication protocol that supports authentication and encryption for managing the servers.
Which two automation tools must be used to meet these requirements? (Choose two.)

  • A. Ansible
  • B. CFEngine
  • C. Chef
  • D. SaltStack
  • E. Puppet

Answer: D,E


NEW QUESTION # 34
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

Answer:

Explanation:


NEW QUESTION # 35
A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported. Which ISL interface parameters are required to meet these requirements?

  • A. Option A
  • B. Option B
  • C. Option C
  • D. Option D

Answer: D


NEW QUESTION # 36
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

  • A. subnet address of BD2
  • B. subnet address of L3Out
  • C. subnet address of BD1
  • D. NAT appliance

Answer: D


NEW QUESTION # 37
DRAG DROP
Drag and drop the configurations from the left onto the correct policies on the right.
Select and Place:

Answer:

Explanation:

Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/ b_UCSM_GUI_Configuration_Guide_2_2/ configuring_network_related_policies.html#task_7F03A03C719A4A44B8ACFAD73AADC73C


NEW QUESTION # 38
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

  • A. GPU support
  • B. network speed
  • C. storage capacity
  • D. processor count

Answer: C

Explanation:
Section: Storage Network Design


NEW QUESTION # 39
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

  • A. E-Trunk
  • B. vPC+
  • C. SAN port channel
  • D. LACP port channel

Answer: C


NEW QUESTION # 40
An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center Which solution must the engineer choose?

  • A. single Cisco HyperFlex stretched cluster
  • B. single Cisco HyperFlex standard cluster
  • C. Cisco Hyperflex edge cluster
  • D. Cisco Hyperflex ROBO cluster

Answer: A


NEW QUESTION # 41
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array. Which design steps must be used to meet these requirements?

  • A. Option D
  • B. Option A
  • C. Option B
  • D. Option C

Answer: D


NEW QUESTION # 42
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

Answer:

Explanation:


NEW QUESTION # 43
What is an advantage of using OTV as compared to VPLS for data center redundancy?

  • A. provides head-end replication
  • B. uses a proactive MAC advertisement
  • C. provides full-mesh connectivity
  • D. prevents loops on point-to-point links

Answer: D


NEW QUESTION # 44
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

Answer:

Explanation:


NEW QUESTION # 45
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?

  • A. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
  • B. Increase the queuing buffer in the port-channel interface connected to the storage array.
  • C. Add an additional FCoE VLAN to the SAN network.
  • D. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.

Answer: B


NEW QUESTION # 46
A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.
Which two data center design steps must be used to meet these requirements? (Choose two.)

  • A. Use asynchronous replication between data centers 1 and 2.
  • B. Implement active cluster in data centers 1 and 2 and backup in 3 and 4.
  • C. Deploy database services in data center 1 and application layer to other data centers.
  • D. Provide application hosting services to customers from the closest data center.
  • E. Configure application data replication to all backup data centers.

Answer: D,E


NEW QUESTION # 47
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

  • A. subnet address of BD2
  • B. subnet address of L3Out
  • C. subnet address of BD1
  • D. NAT appliance

Answer: D


NEW QUESTION # 48
A customer needs a design for a new data center network that meets these requirements:
Logically partition the environment into separate security domains.
Cut costs related to purchasing additional equipment.
Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?

  • A. VDC
  • B. vPC
  • C. VRF
  • D. VLAN

Answer: A


NEW QUESTION # 49
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

  • A. Cisco UCS Manager creates two separate fabric port channels.
  • B. Cisco UCS Manager creates a single fabric port channel.
  • C. Each uplink that connects an IOM is configured as a discrete link.
  • D. The port channel is disabled until an administrator enables it manually.

Answer: A


NEW QUESTION # 50
An engineer is operating data center environment that hosts data-intensive financial applications. The applications are mostly processing HTTP/HTTPS data with large data segments, which results in a CPU contention due to the significant network processing.
Which set of the Ethernet adapter policies must be selected to resolve the issue?

  • A. Option D
  • B. Option A
  • C. Option C
  • D. Option B

Answer: D


NEW QUESTION # 51
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)

  • A. scrub policy
  • B. LAN connectivity policy
  • C. firmware policy
  • D. boot policy
  • E. vNIC policy

Answer: B,E


NEW QUESTION # 52
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)

  • A. VRF-lite
  • B. Distributed anycast gateway
  • C. DC interconnect
  • D. Inter-site network
  • E. spanning tree protocol

Answer: B,C

Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html



NEW QUESTION # 53
......

300-610 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.braindumpsvce.com/300-610_exam-dumps-torrent.html

300-610 Exam questions and answers: https://drive.google.com/open?id=1dDn4r4aUZhtTiQKYVT8j7zvkoagm8Tmp