Excellent NCP-5.15 PDF Dumps With 100% BraindumpsVCE Exam Passing Guaranted [Aug-2021] 100% Pass Your NCP-5.15 Nutanix Certified Professional - Multi cloud Infrastructure at First Attempt with BraindumpsVCE NEW QUESTION 51 How should an administrator enable secure access to Volumes using a password? A. CHAP B. LDAP C. SAML D. iSER Answer: A Explanation:Explanationhttps://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services- [...]

[Q51-Q75] Excellent NCP-5.15 PDF Dumps With 100% BraindumpsVCE Exam Passing Guaranted [Aug-2021]

Share

Excellent NCP-5.15 PDF Dumps With 100% BraindumpsVCE Exam Passing Guaranted [Aug-2021]

100% Pass Your NCP-5.15 Nutanix Certified Professional - Multi cloud Infrastructure at First Attempt with BraindumpsVCE

NEW QUESTION 51
How should an administrator enable secure access to Volumes using a password?

  • A. CHAP
  • B. LDAP
  • C. SAML
  • D. iSER

Answer: A

Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services- Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.

 

NEW QUESTION 52
An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?

  • A. Create a protection domain for each VM with identical schedules
  • B. Create a protection domain for the application and select auto-protect related entities
  • C. Create a consistency group for each VM with identical schedules
  • D. Create a consistency group for the application and place all VMs in it

Answer: D

 

NEW QUESTION 53
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

  • A. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
  • B. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
  • C. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.
  • D. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.

Answer: A

Explanation:
Reference:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prismv5_16:Web-Console-Gui

 

NEW QUESTION 54
An administrator receives an alert email that indicates that a health check has failed.
Which action should the administrator take to collect more information on the failed check?

  • A. Use the ncli command on the CVM to view the details of the check
  • B. In the Prism Web Console, select the URL included in the check details
  • C. Forward the alert email to Nutanix Support requesting more information
  • D. Re-run the check from the CVM CLI using the ncc command

Answer: D

 

NEW QUESTION 55
When host affinity policies are enabled, how does this affect the AHV cluster?

  • A. Micro segmentation rules will not be applied to VMs with affinity policies set on them.
  • B. Metro Availability will no longer work as designed and will result in Split Brain.
  • C. The VM-host affinity cannot be applied on a cluster that has HA reservations configured.
  • D. Host affinity rules do not affect any other aspects of the AHV cluster.

Answer: D

Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v5_17:mul-ahv-affinity-policies-pc-c.html

 

NEW QUESTION 56
A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?

  • A. 3 nodes with cluster RF 3 and container RF 2
  • B. 3 nodes with cluster RF 3 and container RF 3
  • C. 5 nodes with cluster RF 3 and container RF 3
  • D. 5 nodes with cluster RF 2 and container RF 3

Answer: C

 

NEW QUESTION 57
Which 3 VM components can be monitored in the VM dashboard in prism element (choose three)

  • A. Network Utilization
  • B. I/O latency
  • C. Memory Utilization
  • D. CPU utilization
  • E. Flash mode Capability

Answer: B,C,D

 

NEW QUESTION 58
A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

  • A. Volume Groups
  • B. Disk Clones
  • C. Golden Images
  • D. Shadow Clones

Answer: A

 

NEW QUESTION 59
How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?

  • A. From the Life Cycle Management page in Prism Central, click Perform Inventory every morning
  • B. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and set LCM Auto Inventory to Daily
  • C. From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
  • D. From the Life Cycle Management page in Prism Central, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox

Answer: A

Explanation:
Reference:

 

NEW QUESTION 60
An administrator has a 5-node cluster configured for RF2 with 200 TB of raw disk space. The administrator decides to enable Erasure Coding to gain additional usable space.
Approximately how much usable space would be available after enabling Erasure Coding?

  • A. 125 TB
  • B. 150 TB
  • C. 100 TB
  • D. 175 TB

Answer: B

 

NEW QUESTION 61
A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.
Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

  • A. Createbond1 on virbr0 and add the 1GbE interfaces to it for VM use.
  • B. Create separate VLANs that map 10GbE and 1GbE interfaces.
  • C. Create a second bridge on each host and assign the 1GbE interfaces to it.
  • D. Create a second bond on br0 on each host and assign the 1 GbE interfaces to it.

Answer: C

 

NEW QUESTION 62
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)

B)

C)

D)

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: B

 

NEW QUESTION 63
Client needs a backup solution to allow the ability to replicate small data sets to public cloud. The RPO of this tertiary data must be 24 hrs or better.
Which solution should an engineer recommend to the client base on these requirement?

  • A. NearSync
  • B. Protection Domain
  • C. XI Cloud service
  • D. Cloud Connect

Answer: D

 

NEW QUESTION 64
Which two items are required to manually upload an AOS update to a Nutanix Cluster? (Choose two)

  • A. AOS zip file
  • B. AFS Binary file
  • C. JSON file
  • D. AOS Binary
  • E. YML file

Answer: C,D

 

NEW QUESTION 65
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

  • A. Use Cross-Hypervisor DR.
  • B. Deploy the Move appliance.
  • C. Use shared nothing live migration.
  • D. Import the .vmdk into the Image Service.

Answer: A,B

 

NEW QUESTION 66
Which type of data is distributed by Zookeeper to ensure availability in the case of node or block failure?

  • A. Snapshot Data
  • B. User Data
  • C. Configuration Data
  • D. Metadata

Answer: C

 

NEW QUESTION 67
What should be validated as part of the customer's troubleshooting process?

  • A. The VLAN is configured on the trunk of the upstream switch.
  • B. The VLAN is unique to the Nutanix cluster, and not in use elsewhere in the network.
  • C. The VLAN has been configured to use the proper bridge.
  • D. The VLAN has the proper gateway configured in the network settings in Prism.

Answer: D

 

NEW QUESTION 68
what applies to prism central?

  • A. setup through prism as 1,2 or 3-VMs
  • B. clusters and PC need to match hypervisor
  • C. created during foundation
  • D. created bu user as 1 or 3-VM

Answer: D

 

NEW QUESTION 69
An administrator has been tested with storing Nutanix snapshots at an off-premises location. The administrator does not have a second Nutanix cluster to use.
Which two servers could be utilized as remote sites for snapshots? (Choose two)

  • A. Google Cloud Platform
  • B. Amazon Web Services
  • C. The IBM Cloud
  • D. Microsoft Azure
  • E. XI Cloud Services

Answer: B,D

 

NEW QUESTION 70
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Answer:

Explanation:



 

NEW QUESTION 71
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?

  • A. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
  • B. Create a sperate three-node cluster using the nodes that meet the requirement.
  • C. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
  • D. Over-Provision the application VM with additional virtual GPUs.

Answer: C

 

NEW QUESTION 72
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)

  • A. Reclaim the licenses to the Nutanix Support Portal.
  • B. Make sure Auto Evacuation is enabled
  • C. Shut down or live migrate all VMs off of the node.
  • D. Verify the data resiliency status of the cluster.

Answer: C,D

Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=AHV-Admin-Guide-v51:AHV-Admin-Guide-v51

 

NEW QUESTION 73
Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

  • A. Deploy an additional Native KMS Server
  • B. Disable encryption on the cluster
  • C. Change Native KMS to External KMS
  • D. Enable encryption for a VM

Answer: C

Explanation:
Reference:
https://next.nutanix.com/blog-40/security-with-simplicity-encryption-for-your-data-with-1-click-28225

 

NEW QUESTION 74
What requires iSCSI initiator configuration in the guest OS to use Volumes?

  • A. Exchange DAG
  • B. Microsoft Windows Failover Cluster
  • C. SQL Server Always On Availability Group
  • D. Oracle RAC

Answer: B

 

NEW QUESTION 75
......

Trend for NCP-5.15 pdf dumps before actual exam: https://www.braindumpsvce.com/NCP-5.15_exam-dumps-torrent.html

Real Exam Questions & Answers - Nutanix NCP-5.15 Dump is Ready: https://drive.google.com/open?id=13wZ4v7SIPYlAoBsoPu3Xyz_q-moyixgO