Download 5V0-22.23 Exam Dumps Questions to get 100% Success in VMware
100% Accurate Answers! 5V0-22.23 Actual Real Exam Questions
NEW QUESTION # 10
An administrator is tasked to create a Kerberos secured NFS v4.1 file share.
Which information is minimally required during the configuration of the File Service?
- A. Organizational Unit, User Account, Password
- B. Active Directory Domain, User Account, Password
- C. Active Directory Domain. Organizational Unit, User Account. Password
- D. Kerberos Server, User Account, Password
Answer: B
Explanation:
Explanation
To create a Kerberos secured NFS v4.1 file share, the administrator needs to provide the following information during the configuration of the File Service:
Active Directory Domain: The domain name of the Active Directory server that provides Kerberos authentication service for the NFS server and clients. For example, example.com.
User Account: The user name of the Active Directory account that has permissions to join the NFS server to the domain and create service principal names (SPNs) for the NFS server. For example, [email protected].
Password: The password of the Active Directory account that is used for authentication. For example, P@ssw0rd.
These information are required to enable Kerberos security for NFS 4.1 and allow the NFS server to obtain a Kerberos ticket from the Active Directory server. The administrator also needs to specify the NFS share name, path, and access permissions1 References: 1: VMware vSphere Storage Guide, page 118
NEW QUESTION # 11
An application refactor requires significant storage that is being added for logs stored on a VM vDISK. The application VMs run on a dedicated vSAN enabled vSphere Cluster with custom CPUs and RAM, and therefore, cannot vMotion to another vSAN enabled cluster.
The administrator needs a vSAN feature that can be used to allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster.
Which vSAN feature should be used for this purpose?
- A. vSAN File Services
- B. vSAN Replication
- C. vSAN HCI Mesh
- D. vSAN Stretched Clusters
Answer: C
Explanation:
Explanation
To allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster, the administrator should use the vSAN HCI Mesh feature. This feature allows a vSAN cluster to consume storage resources from another vSAN cluster without requiring the hosts to be part of the same cluster. This way, the administrator can leverage the unused or underutilized storage capacity from another cluster and avoid purchasing new hardware or migrating VMs. The vSAN HCI Mesh feature also supports storage policies, encryption, deduplication and compression, and erasure coding across clusters12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 15 2: VMware vSAN 7 Update 1 - HCI Mesh 3
NEW QUESTION # 12
A vSAN administrator has a group of requirements from the application team, which mandates spreading the components across storage devices as much as possible.
What should the vSAN Administrator consider to achieve such a requirement for building a new vSAN cluster? (Choose two.)
- A. Create a dedicated Storage Pool in ESA
- B. Enable Force Provisioning in OSA
- C. Enable deduplication for vSAN
- D. Configure disk striping in ESA
- E. Configure disk striping in OSA
Answer: C,E
Explanation:
Explanation
To spread the components across storage devices as much as possible, the vSAN administrator can configure disk striping in either OSA or ESA. Disk striping is a policy attribute that defines the number of capacity devices across which each replica of a storage object is striped. A higher number of stripes can result in better performance and availability, but also consumes more storage space. Disk striping can be configured in OSA by using the Number of disk stripes per object policy attribute, or in ESA by using the Striping Width policy attribute12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 14 2: VMware vSAN Design and Sizing Guide, page 32
NEW QUESTION # 13
A vSAN administrator has an existing cluster where each ESXi host has the following:
Disk group #1 with one cache device and three capacity devices.
Disk group #2 with one cache device and two capacity devices.
What must the vSAN administrator do to expand disk group #2 to have three capacity devices?
- A. Add the new capacity device to the disk group and vSAN will automatically rebalance
- B. Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device
- C. Put the disk group in maintenance mode, evacuate all data, then add the new capacity device
- D. Create a new disk group with a single capacity device and then migrate the existing capacity devices
Answer: A
Explanation:
Explanation
To expand disk group #2 to have three capacity devices, the vSAN administrator should add the new capacity device to the disk group and vSAN will automatically rebalance. This action allows the administrator to increase the storage capacity of the disk group without disrupting any ongoing operations or evacuating any data. vSAN will automatically distribute data across all devices in the disk group to balance performance and utilization. The other options are not correct. Creating a new disk group with a single capacity device and then migrating the existing capacity devices is not necessary, as it would require more steps and resources than adding a device to an existing disk group. Putting the entire ESXi host or the disk group in maintenance mode and evacuating all data is not required, as it would cause downtime and data movement that could be avoided by adding a device to an existing disk group. References: Add Devices to the Disk Group; Expanding a vSAN Cluster
NEW QUESTION # 14
What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)
- A. Change the Object Space Reservation to 100.
- B. The vSAN cluster is an all-flash architecture.
- C. Deduplication and compression are enabled.
- D. TRIM and UNMAP is enabled.
- E. The VM quest operating system supports ATA TRIM or SCSI UNMAP capability
Answer: B,D
Explanation:
Explanation
The two prerequisites for using the TRIM and UNMAP capability of vSAN are:
B: The vSAN cluster is an all-flash architecture. TRIM and UNMAP are only supported on all-flash vSAN clusters, as they can reclaim space from flash devices that use thin provisioning. TRIM and UNMAP are not supported on hybrid vSAN clusters, as they cannot reclaim space from magnetic disks that use thick provisioning1.
D: TRIM and UNMAP is enabled. TRIM and UNMAP are disabled by default in vSAN, as they might have a performance impact on some workloads. To enable TRIM and UNMAP on a vSAN cluster, the administrator must use the following RVC command: vsan.unmap_support -enable2. After enabling TRIM and UNMAP, the administrator must power off and then power on all VMs that use the vSAN datastore.
NEW QUESTION # 15
The DevOps team of an organization wants to deploy with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
- A. HA enabled on the vSAN cluster
- B. An integration with vSAN File Services
- C. A dedicated network for vSAN Direct
- D. A valid vSAN license for the vSAN cluster
- E. Unclaimed disks in the hosts forvSAN Direct
Answer: D,E
Explanation:
Explanation
To configure vSAN Direct, the administrator must meet two requirements: a valid vSAN license for the vSAN cluster and unclaimed disks in the hosts for vSAN Direct. A vSAN license is required to enable vSAN features and services, including vSAN Direct. Unclaimed disks are local storage devices that are not used by vSAN or any other service, and can be claimed by vSAN Direct to create datastores for persistent storage. The other options are not requirements for vSAN Direct. HA is an optional feature that can be enabled on any cluster, but is not specific to vSAN Direct. A dedicated network for vSAN Direct is not necessary, as vSAN Direct uses the same network as vSAN. An integration with vSAN File Services is not required, as vSAN Direct does not provide file shares, but block storage. References: Set Up vSAN Direct for vSphere with Tanzu; vSAN Licensing Guide
NEW QUESTION # 16
What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring)?
- A. 3 hosts
- B. 4 hosts
- C. 6 hosts
- D. 3 hosts
Answer: C
Explanation:
Explanation
The minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring) is six hosts. This is because a vSAN stretched cluster requires at least three hosts per site, and each site must have enough hosts to tolerate one host failure. Therefore, the minimum configuration is three hosts per site, plus one witness host at a third site, for a total of six hosts. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 14
NEW QUESTION # 17
An administrator has to perform maintenance on one of the hosts in a three-node vSAN Cluster.
Which maintenance mode option will give the administrator the best availability for the VMs with the least effort and data transfer?
- A. Migrate all VMs and their storage from the host to a different vSphere cluster
- B. Full data migration
- C. Migrate all VMs and their storage from the host to a different storage system
- D. Ensure accessibility
Answer: D
Explanation:
Explanation
To perform maintenance on one of the hosts in a three-node vSAN cluster with the best availability for the VMs with the least effort and data transfer, the maintenance mode option that should be used is Ensure accessibility. This option migrates only enough components to ensure that all accessible VMs remain accessible, but does not guarantee full data redundancy or policy compliance. This option is also the only evacuation mode available for a three-node cluster or a cluster with three fault domains, as there are not enough hosts to perform full data migration or re-protection after a failure. The other options are not correct.
Migrating all VMs and their storage from the host to a different storage system or a different vSphere cluster would require more effort and data transfer than using Ensure accessibility, as well as additional resources and configuration steps. Full data migration is not possible in a three-nodecluster, as it would require at least four hosts to evacuate all data from one host and maintain full redundancy and policy compliance.
References: Place a Member of vSAN Cluster in Maintenance Mode; Working with Maintenance Mode
NEW QUESTION # 18
The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.
Which two actions would cause this situation? (Choose two.)
- A. A host failure occurs in the cluster
- B. HA Virtual Machine Monitoring forced a VM to reboot.
- C. A change to the storage policy is applied to the objects.
- D. DRS is relocatingVMs between vSAN nodes.
- E. VM snapshot is being deleted.
Answer: A,C
Explanation:
Explanation
Two actions that would cause some objects to be currently resyncing are:
A change to the storage policy is applied to the objects. This action triggers a resynchronization of objects to make them compliant with the new policy settings, such as FTT, RAID level, stripe width, etc. The resynchronization process copies data from one host to another to create or update replicas or parity segments.
A host failure occurs in the cluster. This action causes some objects to become non-compliant with their storage policy, as they lose one or more replicas or parity segments due to the host failure. The resynchronization process rebuilds the missing components on other hosts in the cluster to restore compliance and availability.References: : VMware vSphere Storage Guide, page 129 : Monitor the Resynchronization Tasks in the vSAN Cluster 1 : VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 19
A host in a vSAN stretched cluster goes offline during an unplanned event.
Which action will be triggered from AQC on the vSAN cluster?
- A. AQC will create a vSAN alarm.
- B. AQC will trigger a vMotion of VMs that went offline.
- C. AQC will restart the VMs that went offline.
- D. AQC will recalculate the quorum on an object.
Answer: D
Explanation:
Explanation
When a host in a vSAN stretched cluster goes offline, vSAN will use Adaptive Resync to recalculate the quorum on an object. Quorum is the minimum number of votes that an object needs to be available. For example, a RAID-1 object with two data components and one witness component needs two votes out of three to be available. If one data component goes offline, the object still has quorum and is available. However, if both data components go offline, the object loses quorum and is unavailable. Adaptive Resync will adjust the quorum requirement based on the availability of components and fault domains. For example, if one fault domain goes offline, Adaptive Resync will lower the quorum requirement to one vote out of two, so that the object can remain available with one data component and one witness component. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 18
NEW QUESTION # 20
An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.
Which requirement must be met?
- A. The ESXi hosts must have a minimum of 64 GBs of memory.
- B. The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
- C. The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.
- D. The ESXi host's controller cache and advanced features must be disabled.
Answer: A
Explanation:
Explanation
To deploy a new two-node vSAN cluster with a shared witness, the administrator must meet several requirements, one of which is that the ESXi hosts must have a minimum of 64 GBs of memory. This is because each host must have enough memory to run the VMs and also to support the vSAN metadata overhead. The other options are not requirements for a two-node vSAN cluster with a shared witness. The ESXi hosts do not need SSDs or NVMe for Virtual Flash File System, as they can use any supported storage devices for vSAN. The ESXi host's controller cache and advanced features do not need to be disabled, as they can be used to improve performance and reliability. The ESXi host's drives do not need to be configured in RAID 1, as vSAN uses its own software-defined RAID mechanism to provide Failures to Tolerate.
References: Shared Witness for 2-Node vSAN Deployments; Two-Node Cluster Requirements
NEW QUESTION # 21
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
- A. Clone the ESXi boot partition to all new hosts, since the hardware is identical
- B. Launch Quickstart to Add Hosts to a vSAN Cluster
- C. Run vim-cmd to capture, and apply the configuration from an existing host
- D. Use a Host Profile that was extracted from an existing host
Answer: D
Explanation:
Explanation
To add 30 additional vSAN ReadyNodes to an existing vSAN cluster with the fastest approach, the vSAN administrator should use a Host Profile that was extracted from an existing host. AHost Profile is a configuration template that captures the settings of a reference host and applies them to other hosts or clusters.
This way, the administrator can quickly and consistently configure multiple hosts with the same settings, such as network, storage, security, and services. The other options are not correct. Running vim-cmd to capture and apply the configuration from an existing host is not as fast or convenient as using a Host Profile, as it requires running commands on each host individually. Launching Quickstart to Add Hosts to a vSAN Cluster is not possible, as Quickstart is only available for new clusters or clusters that were configured through Quickstart.
Cloning the ESXi boot partition to all new hosts is not recommended, as it might cause conflicts or errors with the host identity, network settings, or licenses. References: Configuring Hosts Using Host Profile; Using Quickstart to Configure and Expand a vSAN Cluster
NEW QUESTION # 22
A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- B. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
- C. It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.
- D. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
Answer: A
Explanation:
Explanation
To upgrade the vSAN environment from vSAN 7.0 U3 to vSAN 8.0 using vLCM in a non-internet connected environment, the administrator should configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository. UMDS stands for Update Manager Download Service, which is a component of vSphere Lifecycle Manager that can be used to download patches and updates for ESXi hosts, virtual appliances, and VMware Tools from the VMware online depot and store them in a shared repository. The administrator can then configure the vSphere Lifecycle Manager to use the UMDS-shared repository as a custom depot for patching and upgrading the vSAN cluster. This option allows the administrator to perform offline upgrades without requiring internet access for the vSAN cluster12 References: 1: VMware vSphere Lifecycle Manager Administration, page 22 2: VMware vSphere Update Manager Download Service, page 5
NEW QUESTION # 23
What is the purpose of host rebuild reserve in vSAN?
- A. Allocates capacity for vCLS
- B. Stores vSphere HA heartbeats
- C. Reserves space for internal operations
- D. Reserves space in case of single host failure
Answer: D
Explanation:
Explanation
The host rebuild reserve is a feature that allows vSAN to reserve space in the cluster for vSAN to be able to repair in case of a single host failure. This reservation is set to one host worth of capacity, which means that if one host in the vSAN cluster fails and no longer contributes storage, there is still sufficient capacity remaining in the cluster to rebuild and re-protect all vSAN objects. This feature prevents the creation of new VMs or powering on VMs if such operations consume the reserved space. By default, the host rebuild reserve is disabled, but it can be enabled in the vSAN Services configuration. The other options are not related to the hostrebuild reserve. References: vSAN Capacity Management in v7.0U1; Configure Reserved Capacity
NEW QUESTION # 24
Due to a planned power outage, an administrator decides to shut down the vSAN cluster using the Shutdown Cluster Wizard. The administrator starts by checking the vSAN health service to confirm the cluster is healthy and then powers off all virtual machines (VMs) including vCLS VMs.
Which step needs to be taken before starting the Shutdown Cluster Wizard?
- A. Place all ESXi hosts into maintenance mode
- B. Turn off High Availability
- C. Disable cluster member updates from vCenter Server
- D. Shutdown vCenter
Answer: B
Explanation:
Explanation
To shut down the vSAN cluster using the Shutdown Cluster Wizard, the administrator needs to turn off High Availability (HA) before starting the wizard. This is because HA monitors the cluster for host failures and attempts to restart the affected VMs on other hosts. If HA is not turned off, the cluster might register host shutdowns as failures and trigger unnecessary VM restarts, which can interfere with the graceful shutdown process. Therefore, the administrator should disable HA from the Configure tab of the cluster before using the Shutdown Cluster Wizard12 References: 1: Shut Down the vSAN Cluster Using the Shutdown Cluster Wizard 3 2: Manually Shut Down and Restart the vSAN Cluster 4
NEW QUESTION # 25
A vSAN administrator needs to update vSAN from version 7.0.2 to version 8.0.
Which is the correct order to perform the update?
- A. vSphere -> vCenter -> vSAN on-disk format
- B. vSphere -> vSAN on-disk format -> vCenter
- C. vSAN on-disk format -> vSphere -> vCenter
- D. vCenter -> vSphere -> vSAN on-disk format
Answer: D
Explanation:
Explanation
The correct order to perform the update from vSAN version 7.0.2 to version 8.0 is to upgrade the vCenter Server first, then upgrade the ESXi hosts, and finally upgrade the vSAN on-disk format. This order follows the general vSphere upgrade order, which ensures compatibility and interoperability between different components. Upgrading the vCenter Server first allows it to manage and monitor the ESXi hosts and the vSAN cluster during the upgrade process. Upgrading the ESXi hosts second ensures that they have the latest software patches and drivers for vSAN. Upgrading the vSAN on-disk format last enables the new features and functionality of vSAN 8.0. The other options are not correct, as they do not follow the recommended upgrade order.
NEW QUESTION # 26
An organization plans to implement a new vSAN 8.0 cluster to take advantage of the new features around improved I/O flow, better resiliency, and more efficient disk usage. The vSAN ReadyNodes available for the cluster consist of eight NVMe disks.
How should the organization configure the disk layout?
- A. Use vSAN ESA and create two disk groups with one cache disk and three capacity disks each
- B. Use vSAN OSA and create two disk groups with one cache disk and three capacity disks each
- C. Use vSAN ESA and the new Storage pool configuration where all disks contribute to capacity
- D. Use vSAN OSA and thenew Storage pool configuration where all disks contribute to capacity
Answer: C
Explanation:
Explanation
Using vSAN ESA and the new Storage pool configuration where all disks contribute to capacity is the correct answer because it allows the organization to take advantage of the new features in vSAN 8.0, such as improved I/O flow, better resiliency, and more efficient disk usage. With vSAN ESA, there is no need to create disk groups or designate cache disks, as all disks are treated as capacity disks and use a new algorithm to distribute data across them. This also simplifies the disk management and reduces the overhead of cache management. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 6
What's New in VMware vSAN 8.0
NEW QUESTION # 27
vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.
What is the result of this situation?
- A. The vSphere Web Client will choose the last vSAN Storage Policy used.
- B. The VM provisioning will fail.
- C. The VM objects will be protected based on the vSAN Default Storage Policy configurations.
- D. No data protection will be applied to the VM objects.
Answer: C
Explanation:
Explanation
If the administrator did not explicitly assign a storage policy when provisioning a new VM on a vSAN datastore, the result is that the VM objects will be protected based on the vSAN Default Storage Policy configurations. The vSAN Default Storage Policy is assigned to all VM objects if no other vSAN policy is assigned when provisioning a VM. The default policy contains vSAN rule sets and a set of basic storage capabilities, such as Failures to tolerate set to 1, Number of disk stripes per object set to 1, and Thin provisioning. The other options are not correct. The VM provisioning will not fail, as vSAN requires that every VM has at least one storage policy. The vSphere Web Client will not choose the last vSAN Storage Policy used, as it will always apply the default policy if no other policy is selected. No data protection will not be applied to the VM objects, as they will have at least one replica based on the default policy.
References: About the vSAN Default Storage Policy; Using vSAN Policies
NEW QUESTION # 28
During yesterday's business hours, a cache drive failed on one of the vSAN OSA nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of the data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?
- A. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.
- B. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.
- C. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
C Remove the existing vSAN disk group and physically replace thedevice. Thencheck to verify that the ESXi host automatically detects the new device Afterwardsmanually recreate the Disk Group
Answer: B
Explanation:
Explanation
To replace a failed cache drive in a vSAN OSA cluster, the vSAN administrator should remove the existing vSAN disk group and physically replace the device. Then check to verify that the ESXi host automatically detects the new device Afterwards manually recreate the Disk Group. This is because when a cache drive fails, it affects the entire disk group that contains it, and vSAN does not allow removing only the cache drive from a disk group. Therefore, the administrator must remove the whole disk group before replacing the cache drive, and then recreate it with the new cache drive and the existing capacity drives. The other options are not correct. Physically replacing the failed cache drive without removing the disk group first might cause errors or inconsistencies in vSAN configuration. vSAN will not automatically create a new disk group or allocate storage after replacing a cache drive, as these actions require manual intervention from the administrator.
Rebalancing the cache layer is not necessary after replacing a cache drive, as vSAN will automatically distribute data across all devices in the disk group. References: Replace a Flash Caching Device on a Host; How to manually remove and recreate a vSAN disk group using esxcli
NEW QUESTION # 29
What is the maximum amount of capacity disks an administrator can have in disk groups on a single vSAN OSA host?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
The maximum amount of capacity disks an administrator can have in disk groups on a single vSAN OSA host is 35. This is because a single host can have up to five disk groups, and each disk group can have up to seven capacity disks. Therefore, the maximum number of capacity disks per host is 5 x 7 = 35. The other options are not correct, as they are lower than the maximum number of capacity disks per host. References: Designing and Sizing vSAN Storage; [vSAN ReadyNode Hardware Guidance]
NEW QUESTION # 30
......
Best Value Available! Realistic Verified Free 5V0-22.23 Exam Questions: https://www.braindumpsvce.com/5V0-22.23_exam-dumps-torrent.html
Pass Your Exam Easily! 5V0-22.23 Real Question Answers Updated: https://drive.google.com/open?id=1PppoMOtNPaMDU-GwQCcsc9X0j2XxW8fF