300-815 Dumps To Pass CCNP Collaboration Exam in One Day (Updated 120 Questions) [Q12-Q28]

300-815 Dumps To Pass CCNP Collaboration Exam in One Day (Updated 120 Questions)

300-815 Exam Brain Dumps - Study Notes and Theory

Certification Path

After earning the CCNP Collaboration designation, you may want to further develop your tech skills. This way, the most sensible move for you is to pursue another Cisco certificate of the expert level, which is the CCIE Collaboration validation. Having such a certification will equip you with the relevant skills to manage high-level collaboration solutions within an enterprise.

Cisco 300-815 CLACCM exam, which is also called Implementing Cisco Advanced Call Control and Mobility Services, will give you access to two certifications: CCNP Collaboration and Cisco Certified Specialist – Collaboration Call Control and Mobility Implementation. These are the professional and specialist-level certificates, respectively, offered by Cisco, arguably the best technology firm in the world.

300-815 is not the only requirement to fulfill to earn CCNP Collaboration. To get accredited, the candidates also have to pass the core test, 350-801 CLCOR. There are no specific prerequisites for 300-815 exam, so all you need is a proper understanding of networking technologies and Cisco collaboration solutions.

NEW QUESTION 12
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)

A. chooses the route group that is configured under the device pool of the calling-party device
B. can be associated under the route group
C. can be assigned directly to the route pattern
D. chooses the route group that is configured under the device pool of the called-party device
E. can be associated only under the route list

Answer: A,E

NEW QUESTION 13
An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?

A. debug H.225 media
B. debug H.225 asn1
C. debug H.246 asn 1
D. debug H.323 messages
E. debug H.323 asn 1

Answer: B

NEW QUESTION 14
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?

A. Contact: header of the 200 OK response
B. c= line of SDP content
C. Allow: header if the 200 OK response
D. o= line of SDP content

Answer: D

NEW QUESTION 15
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

A. line group
B. route group
C. hunt pilot
D. hunt list

Answer: C

NEW QUESTION 16
Refer to the exhibit.

In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)

A. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
B. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
D. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
E. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.

Answer: A,D

NEW QUESTION 17
Which two extended capabilities must be configured on dial peers for fast start-to-early media scenarios (H.323 to SIP interworking)? (Choose two.)

A. DTMF
B. AUDIO
C. FAX
D. VIDEO
E. BFCP

Answer: A,E

Explanation:
Section: Signaling and Media Protocols

NEW QUESTION 18
Refer to the exhibit.

A user dials 84969010 and observes that the call is not routed immediately. The administrator notices that after matching the fixed-length translation pattern, the call hits the \+! pattern and waits for interdigit timeout What should be configured to ensure that the call routes out immediately?

A. Do Not Wait For Interdigit Timeout On Subsequent Hops on the route pattern
B. Allow Device Override on the route pattern
C. Do Not Wait For Interdigit Timeout On Subsequent Hops on the translation pattern
D. Route Next Hop By Calling Party Number on the translation pattern

Answer: C

NEW QUESTION 19
The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses H.323 protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real- Time Transport Protocol traffic that had the one-way audio call.
You gather the H.225 and H.245 messages for one of the one-way audio calls. Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).

A. H.245 Open Logical Channel
B. H.245 Terminal Capability Set
C. H.245 Open Logical Channel Ack
D. H.225 Connect

Answer: A

Explanation:
Reference:
http://ccievoicehopeful.blogspot.com/2012/09/h323-notes.html

NEW QUESTION 20

Refer to the exhibit. How many maximum hops can an ILS updarte traverse?

A. 0
B. 1
C. 2
D. 3

Answer: D

Explanation:
Section: Cisco Unified CM Call Control Features

NEW QUESTION 21
Refer to the exhibit.

Calls incoming from the provider are not working through newly set up Cisco Unified Border Element. Provider engineers get the 404 Not Found SIP message. Incoming calls are coming from the provider with called number "222333444" and Cisco Unified Communications Manager is expecting the called number to be delivered as "444333222". The administrator already verified that the IP address of the Cisco Unified CM is set up correctly and there are no dial peers configured other than those shown in the exhibit. Which action must the administrator take to fix the issue?

A. Fix the voice translation-rule to match specifically number "222333444" and change it to "444333222".
B. Change the destination-pattern on the outgoing dial peer to match "444333222".
C. Create specific matching for "222333444" on the incoming dial peer.
D. Set up translation-profile on the incoming dial peer to match incoming traffic.

Answer: D

NEW QUESTION 22
Which services are needed to successfully implement Cisco Extension Mobility in a standalone Cisco Unified Communications Manager server?

A. Cisco Extended Functions, Cisco Extension Mobility, and Cisco AXL Web Service
B. Cisco CallManager, Cisco TFTP, and Cisco Extension Mobility
C. Cisco CallManager, Cisco TFTP, and Cisco CallManager SNMP Service
D. Cisco TAPS Service, Cisco TFTP, and Cisco Extension Mobility

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_5_2/ccmfeat/ CUCM_BK_C3A84B33_00_cucm-feature-configuration-guide_1052/CUCM_BK_C3A84B33_00_cucm-feature- configuration-guide_chapter_011101.html#CUCM_TK_A337E035_00

NEW QUESTION 23
Refer to the exhibit.

DN 1003 was the last to ring during the most recent call. Which hunting method ensures that DN 1005 is presented with the next call when the hunt pilot is dialed?

A. peer
B. call-blast
C. sequential
D. parallel

Answer: A

NEW QUESTION 24
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?

A. R2(config-ephone-dn)#park reservation-group 1
B. R2(config-ephone-dn)#park reservation-group 60
C. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
D. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002

Answer: D

NEW QUESTION 25
Refer to the exhibit.

A user dials 84969010 and observes that the call is not routed immediately. The administrator notices that after matching the fixed-length translation pattern, the call hits the \+! pattern and waits for interdigit timeout What should be configured to ensure that the call routes out immediately?

A. Do Not Wait For Interdigit Timeout On Subsequent Hops on the route pattern
B. Allow Device Override on the route pattern
C. Do Not Wait For Interdigit Timeout On Subsequent Hops on the translation pattern
D. Route Next Hop By Calling Party Number on the translation pattern

Answer: C

NEW QUESTION 26
You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?

A. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)
B. configuration items common for all SIP phones
C. configuration for SIP registrar service
D. configuration for a single SIP phone

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sip.html

NEW QUESTION 27
Refer to the exhibit.

An engineer is troubleshooting an issue where inbound calls to Cisco UCM with early media fail to establish. While investigating the issue, the engineer finds that Cisco UCM is set to require a PRACK. but the Cisco Unified Border Element is not sending it. Which command is causing this issue?