[2021] HPE0-J68 by HPE ASE Actual Free Exam Practice Test
Free HPE ASE HPE0-J68 Exam Question
NEW QUESTION 83
A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?
- A. To easily move workloads to AWS or Azure in the event of site disaster.
- B. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.
- C. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR and StoreOnce.
- D. To regularly send backups to the cloud for the purposes of DR protection.
Answer: D
NEW QUESTION 84
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?
- A. Storage virtualization
- B. Adaptive Optimization
- C. Space Reclamation
- D. Thin Provisioning
Answer: B
NEW QUESTION 85
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?
- A. Dynamic Optimization between tier 0 and tier 1
- B. Dynamic Optimization using tier 1
- C. Adaptive Optimization using tier 1
- D. Dynamic Optimization using tier 2
Answer: A
Explanation:
During a peak period when performance is critical, the VV can be optimized by moving to faster disk and the RAID level.
NEW QUESTION 86
A customer is deploying a new StoreOnce VSA solution.
How can the necessary storage capacity be added to the VSA? (Choose two.)
- A. The Cloud bank container needs to be configured once the VSA boots
- B. The Cloud bank container needs to be configured from the vCenter client
- C. Add a new virtual hard disk to the virtual machine
- D. Verify sufficient capacity LTUs are available
Answer: B,C
NEW QUESTION 87
You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?
- A. combine management and backup Ethernet traffic
- B. consolidate activity windows for housekeeping tasks
- C. use separate backup targets for different data types
- D. size solution for a single backup device
Answer: B
NEW QUESTION 88
Refer to the exhibit.
You create two snapshots of a thin provisioned base volume in an HPE Primer a. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.
Place the actions on the left into the order they are taken on the right.
Answer:
Explanation:
1 - Redirect the snapshots
2 - Copy block to snapshot CPG
3 - Update the block with new data
NEW QUESTION 89
You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.
Which technology can be configured at 3PAR to support forwarding events from the array to the customer's monitoring application?
- A. DMI
- B. IPMI
- C. NTP
- D. SNMPv3
Answer: D
NEW QUESTION 90
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)
- A. SAS
- B. FC
- C. Infiniband
- D. iSCSI
- E. NVMe
Answer: B,D
NEW QUESTION 91
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Peer persistence
- B. Persistent Memory
- C. Persistent port (96)
Answer: C
Explanation:
D Persistent Cache
NEW QUESTION 92
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. Recovery Manager central
- B. HPE 3PAR Remote Copy
- C. Store virtual Peer motion
- D. StoreServ Peer Motion
Answer: A
NEW QUESTION 93
A customer uses Recovery manager central for Vmware (RMC-V).They need to ability to perform granular recovery of application item directly from backups...Which solution integrates with RMC-V to provide the desired requirements?
- A. Netbackup
- B. Veeam Backup & Replication
- C. CommVault
- D. StoreOnce cloudbank
Answer: B
NEW QUESTION 94
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?
- A. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
- B. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
- C. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
- D. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.
Answer: A
NEW QUESTION 95
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?
- A. Quality of services
- B. Enhanced group management
- C. Frame filtering
- D. Traffic isolation Zones
Answer: D
NEW QUESTION 96
A customer migrate their infrastructure from a 3rd party storage to a Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMVision?
- A. SNMP trap service has to be configured to send traps to infosight and integrate performance data using VMvision.
- B. VMware vSphere storage API's array integration (VAAI)has to be configured to combine storage and VM performance metrics
- C. VMvision is an agentless integration into infosight and needs only the Vcenter server appliance credentials to connect. (page 112)
- D. Nibmle service processor collects relevant per VM performance data and send them using SSL port 443 to VMvision
Answer: B
NEW QUESTION 97
You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.
What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)
- A. It provides fine-grain visibility into Storage Fabrics (FC + Ethernet)
- B. It offers automated SPOCK validation
- C. It runs in a dedicated JVM
- D. It provides a global View
- E. It runs in a browser
Answer: D,E
NEW QUESTION 98
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Integration capabilities utilizing HTML
- B. Manual data provisioning and policy-based copy protection
- C. Includes Peer Copy asynchronous replication
- D. Enables automatic transparent failover
- E. Less expensive than traditional backup
Answer: C,E
NEW QUESTION 99
A customer has a 3PAR storeserv with FC and SSD drives who would like to improve the performance for random reads. Which 3PAR Storeserve feature would provide better read performance?
- A. Smart Cache
- B. Adaptive Flash Cache
- C. Deduplication
- D. Express Layout
Answer: B
NEW QUESTION 100
A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances.
What do you need to consider when designing the new VSA instances?
- A. They must be of equal or greater capacity than the existing instances in a cluster.
- B. They can only have equal to or smaller capacity compared to the existing instances.
- C. They will require downtime to re-balance the resources within the cluster.
- D. They must be configured into a new management group.
Answer: A
NEW QUESTION 101
You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)
- A. Infosight performs firmware and software updates without additional administrative support.
- B. Customers only have to deploy a service processor for automating support tasks.
- C. Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.
- D. Customers always interact with a 3rd level support engineer ,when needed
Answer: C,D
NEW QUESTION 102
A customer needs to store a large amount of unstructured data that must be queried quickly.
Which type of storage meets the customer's needs?
- A. object
- B. flash
- C. file
- D. hash
Answer: A
NEW QUESTION 103
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?
- A. MSA
- B. Nimble dHCI
- C. Primera
- D. Nimble
Answer: C
NEW QUESTION 104
......
HP HPE0-J68 Actual Questions and Braindumps: https://www.braindumpsvce.com/HPE0-J68_exam-dumps-torrent.html
HPE0-J68 dumps & HPE ASE sure practice dumps: https://drive.google.com/open?id=1Lcyv5RnwOsGVsMhx1j8nluUTy9nHHsGd