100% Updated Fortinet FCSS_ADA_AR-6.7 Enterprise PDF Dumps
Use Valid Exam FCSS_ADA_AR-6.7 by BraindumpsVCE Books For Free Website
NEW QUESTION # 22
Refer to the exhibit.
The rule evaluates multiple VPN logon failures within a ten-minute window. Consider the following VPN failure events received within a ten-minute window:
How many incidents are generated?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The rule triggers an incident when there are two or more VPN logon failures within a 10-minute window, grouped by Source IP, Reporting Device, Reporting IP, and User. Let's analyze the events:
Breakdown of Events:
1. Reporting IP: 1.1.1.1, Source IP: 2.2.2.2, Device: FortiGate, User: Sarah
2. Reporting IP: 1.1.1.1, Source IP: 2.2.2.2, Device: FortiGate, User: John
3. Reporting IP: 1.1.1.3, Source IP: 2.2.2.2, Device: FortiGate2, User: Tom
4. Reporting IP: 1.1.1.3, Source IP: 2.2.2.2, Device: FortiGate2, User: John
5. Reporting IP: 1.1.1.3, Source IP: 2.2.2.2, Device: FortiGate2, User: Sarah
6. Reporting IP: 1.1.1.1, Source IP: 2.2.2.2, Device: FortiGate, User: Tom Now, applying the grouping criteria (Source IP, Reporting Device, Reporting IP, and User):
*Group 1: (1.1.1.1, 2.2.2.2, FortiGate, John) → 1 occurrence (not enough)
*Group 2: (1.1.1.1, 2.2.2.2, FortiGate, Sarah) → 1 occurrence (not enough)
*Group 3: (1.1.1.1, 2.2.2.2, FortiGate, Tom) → 2 occurrences (incident triggered)
*Group 4: (1.1.1.3, 2.2.2.2, FortiGate2, John) → 2 occurrences (incident triggered)
*Group 5: (1.1.1.3, 2.2.2.2, FortiGate2, Sarah) → 1 occurrence (not enough)
*Group 6: (1.1.1.3, 2.2.2.2, FortiGate2, Tom) → 1 occurrence (not enough) Final Incident Count:
*One incident for Group 3 (Tom on FortiGate)
*One incident for Group 4 (John on FortiGate2)
NEW QUESTION # 23
Refer to the exhibit.
An administrator deploys a new collector for the first time, and notices that all the processes except the phMonitor are down.
How can the administrator bring the processes up?
- A. The collector was not deployed properly and must be redeployed.
- B. Rebooting the collector will bring up the processes.
- C. The processes will come up after the collector is registered to the supervisor.
- D. The administrator needs to run the command phtools --start all on the collector.
Answer: C
NEW QUESTION # 24
Refer to the exhibit.
The service provider deployed FortiSIEM without a collector and added three customers on the supervisor.
What mistake did the administrator make?
- A. Customer A and customer B have overlapping IP addresses.
- B. At least one collector must be deployed to collect logs from service provider infrastructure devices.
- C. Collectors must be deployed on all customer premises before they are added to organizations on the supervisor.
- D. The number of workers on the FortiSIEM cluster must match the number of customers added.
Answer: A
NEW QUESTION # 25
If an unusual spike in network traffic is detected, which tool would be most effective in automating a response action?
- A. FortiUser?
- B. FortiAntivirus?
- C. FortiStorage?
- D. FortiSOAR?
Answer: D
NEW QUESTION # 26
Refer to the exhibit.
The service provider deployed FortiSIEM without a collector and added three customers on the supervisor.
What mistake did the administrator make?
- A. Customer A and customer B have overlapping IP addresses.
- B. At least one collector must be deployed to collect logs from service provider infrastructure devices.
- C. Collectors must be deployed on all customer premises before they are added to organizations on the supervisor.
- D. The number of workers on the FortiSIEM cluster must match the number of customers added.
Answer: A
NEW QUESTION # 27
Refer to the exhibit.
A service provider does not have a dedicated worker in the cluster, but still wants to add a collector to an organization.
What option does the administrator have?
- A. Define a pseudo address as a worker IP address
- B. Define the supervisorIP address as a worker unload address
- C. Install a worker
- D. Ignore the warning and continue adding the collector
Answer: B
Explanation:
InFortiSIEM, collectors need to upload event logs to aworker nodefor processing. However, if there isno dedicated worker, thesupervisor can function as the workerto receive data.
# The error message suggests that aworker upload addressmust be defined before adding a collector.
# Since there isno dedicated worker, the administrator canset the Supervisor IP as the upload destinationto enable log collection.
NEW QUESTION # 28
Refer to the exhibit.
The profile database contains CPU utilization values from day one. At midnight on the second day, the CPU utilization values from the daily database will be merged with the profile database.
In the profile database, in the Hour of Day column where 9 is the value, what will be the updated minimum, maximum, and average CPU utilization values?
- A. Min CPU Util=32.31, Max CPU
Util=33.50 and AVG CPU
Util=32.67 - B. Min CPU Util=33.50, Max CPU
Util=33.50 and AVG CPU
Util=33.50 - C. Min CPU Util=32.31, Max CPU
Util=33.50 and AVG CPU
Util 33.50 - D. Min CPU Util=32.31, Max CPU
Util=32.31 and AVG CPU
Util=32.31
Answer: A
Explanation:
At midnight, the daily database values merge into the profile database. The new values for Hour 9 are calculated as follows:
*Minimum CPU Utilization: The new minimum is the lower of the existing (32.31) and new (33.50) values → 32.31
*Maximum CPU Utilization: The new maximum is the higher of the existing (32.31) and new (33.50) values → 33.50
*Average CPU Utilization:
*The previous average was 32.31 (from one point).
*The new value from the daily database is 33.50 (one additional point).
*The new average is calculated as:
Thus, after merging, the updated profile database values for Hour 9 are:
*Min CPU Util = 32.31
*Max CPU Util = 33.50
*Avg CPU Util = 32.67
NEW QUESTION # 29
If a FortiSIEM rule is constructed to detect a potential data exfiltration attempt, which framework can provide insights on the techniques attackers might use for this purpose?
- A. NIST SP 800-53?
- B. ISO/IEC 27001?
- C. OWASP Top Ten?
- D. MITRE ATT&CK®?
Answer: D
NEW QUESTION # 30
Which statement accurately contrasts lookup tables with watchlists?
- A. You can reference lookup table data in analytic queries and reports almost immediately, whereas you may have to wait up to 5-10 minutes for watchlist entries to be useable in queries and reports.
- B. You can populate lookup tables through an incident, whereas you cannot populate watchlists through an incident.
- C. Lookup tables can contain multiple columns, whereas watchlists contain only a single column.
- D. Lookup table values age out after a period, whereas watchlist values do not have any time condition.
Answer: C
Explanation:
Lookup tables and watchlists serve different purposes in Fortinet's Advanced Analytics:
# Lookup tables allow for structured data storage with multiple columns, making them useful for correlating different attributes or key-value pairs.
# Watchlists are simpler and contain only a single column, often used for quick reference to flagged values, such as IP addresses or user accounts.
NEW QUESTION # 31
What happens to UEBA events when a user is off-net?
- A. The agent will upload the events to the Worker if it cannot upload them to a FortiSIEM collector
- B. The agent will cache events locally if it cannot upload them to a FortiSIEM collector
- C. The agent will upload the events to the Supervisor if it cannot upload them to a FortiSIEM collector
- D. The agent will drop the events if it cannot upload them to a FortiSIEM collector
Answer: B
NEW QUESTION # 32
Which two statements about phRuleWorker are true? (Choose two.)
- A. phRuleWorker exists on both the supervisor and workers.
- B. phRuleWorker uses a 60-second bucket as an evaluation window.
- C. phRuleWorker evaluates non-aggregate conditions as defined in subpattern filters of a rule in memory.
- D. phRuleWorker exists on the worker only.
Answer: A,B
Explanation:
phRuleWorker processes events in 60-second intervals (buckets). This means that events within a one-minute window are evaluated together for rule conditions, helping detect patterns, correlations, and triggers.
phRuleWorker runs both on the supervisor and worker nodes to distribute event processing. The supervisor primarily orchestrates rule evaluation, while workers handle distributed event processing.
NEW QUESTION # 33
Refer to the exhibit.
Consider a nested event query where both inner and outer queries are event queries.
Reporting IP is selected from the CMDB group Network Device, Event Type is selected from the CMDB group Logon Success, and Source IP is selected from the report Failed Logons to Network Devices.
An administrator is about to execute the nested query. The report time ranges must be set before execution. The Nested Time Range will be applied to which attributes?
- A. The nested time range will be configured for the Reporting IP attribute.
- B. The nested time range will be configured for the Reporting IP and Event Type attributes.
- C. The nested time range will be configured for the Event Type attribute.
- D. The nested time range will be configured for the Source IP attribute.
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
The profile database contains CPU utilization values from day one. At midnight on the second day, the CPU utilization values from the daily database will be merged with the profile database.
In the profile database, in the Hour of Day column where 9 is the value, what will be the updated minimum, maximum, and average CPU utilization values?
- A. Min CPU Util=32.31, Max CPU Util=33.50 and AVG CPU Util=32.67
- B. Min CPU Util=32.31, Max CPU Util=32.31 and AVG CPU Util=32.31
- C. Min CPU Util=32.31, Max CPU Util=33.50 and AVG CPU Util=33.50
- D. Min CPU Util=33.50, Max CPU Util=33.50 and AVG CPU Util=33.50
Answer: A
NEW QUESTION # 35
What is the disadvantage of automatic remediation?
- A. It can make a disruptive change to a user, block access to an application, or disconnect critical systems from the network.
- B. Threat behavior occurring during the night could take hours to respond to.
- C. External threats or attacks detected by FortiSIEM will need user interaction to take action on an already overworked SOC team.
- D. It is equivalent to running an IPS in monitor-only mode-watches but does not block.
Answer: A
Explanation:
Automatic remediation in FortiSIEM enables real-time response to security threats without manual intervention. While this can improve response times, it also introduces risks because actions are taken automatically based on predefined rules, without human verification.
*Automated responses could mistakenly block legitimate users from critical systems or applications.
*Misconfigured rules might disconnect essential systems, causing business disruptions.
*If an incident is a false positive, automatic remediation may interfere with normal operations unnecessarily.
NEW QUESTION # 36
Which three processes are collector processes? (Choose three.)
- A. phMonitorAgent
- B. phParser
- C. phAgentManager
- D. phRuleMaster
- E. phReportMaster
Answer: A,B,C
NEW QUESTION # 37
How can FortiSIEM baseline and profile reports assist in enhancing security?
- A. By generating a list of user passwords for verification purposes?
- B. By detailing the software version details of network devices?
- C. By providing insights into potential areas of vulnerability?
- D. By highlighting deviations from established norms?
Answer: C,D
NEW QUESTION # 38
Refer to the exhibit.
If the Z-score for this rule is greater than or equal to three, what does this mean?
- A. The rate of firewall connection is above the current average value.
- B. The rate of firewall connection is optimum.
- C. The rate of firewall connection is below historical average value.
- D. The rate firewall connection is above the historical average value.
Answer: D
Explanation:
The Z-score formula in the expression builder calculates how many standard deviations the current value is from the historical average. The formula used is:
AVG(Firewall Session) represents the current firewall session rate.
STAT_AVG(AVG(Firewall Session);112) represents the historical average over a 112-time unit window.
STAT_STDDEV(AVG(Firewall Session);112) represents the historical standard deviation over the same period.
A Z-score ≥ 3 indicates that the current firewall session rate is significantly higher than the historical average (3 standard deviations above the mean), signaling an anomaly.
NEW QUESTION # 39
Refer to the exhibit.
The exhibit shows the output of an SQL command that an administrator ran to view the natural_id value, after logging into the Postgres database.
What does the natural_id value identify?
- A. The collector
- B. The worker
- C. An agent
- D. The supervisor
Answer: A
Explanation:
Thenatural_idvalue in theph_sys_connectortable of theFortiSIEM Postgres databaseuniquely identifies acollector.
# The SQL query retrieves details fromph_sys_connector, which stores information about registered collectors.
# Thecust_org_idfield indicates theorganization IDthe collector belongs to.
# Thenamefield shows thecollector's name(OrgA_Collector).
# Theip_addrfield lists thecollector's IP address(10.10.2.91).
# Thenatural_idvalue uniquelyidentifies the collector in the system.
NEW QUESTION # 40
......
Fortinet FCSS_ADA_AR-6.7 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Fortinet FCSS_ADA_AR-6.7 Official Cert Guide PDF: https://www.braindumpsvce.com/FCSS_ADA_AR-6.7_exam-dumps-torrent.html
Free FCSS in Security Operations FCSS_ADA_AR-6.7 Official Cert Guide PDF Download: https://drive.google.com/open?id=14PlRVBM6KKZJgTpDLKWnOx3rXbO0xFg8