Secure payment system of buying 6101.1

Credit Card is our main paying tool when you buy 6101.1 in the site. As we all know, Credit Card is the most secure payment system in international trade. So we choose credit card to protect customers' payment safety in 6101.1 vce download. You could also use credit card to pay for Avaya 6101.1, because the credit card is bounded with Credit Card, so the credit card is also available. There are some other safe paying ways to choose, but Credit Card is more fast and secure of the Avaya Ethernet Routing Switch Implementation Exam exam dumps.

After your payment for 6101.1, you email will receive the braindumps in a few seconds or minutes. It's a very short time, no worry to cost your delivery to get it. As for 6101.1, there is almost 98%-100% person passing for that.

If you fail the exam unfortunately, you could apply for your full refund. With confirming your transcript, you will get your full refund for the 6101.1.

Avaya Ethernet Routing Switch Implementation Exam 6101.1 exam vce dumps preparation

Nowadays, 6101.1 training online is chosen as a better way by examinees to clear 6101.1 test. Many examinees are IT workers, so they don't have enough time to join some training classes. As professional vce braindumps provider, we have the best and valid 6101.1 study guide for Avaya Avaya Ethernet Routing Switch Implementation Exam exams. If you never used our brain dumps, suggest you to download the free vce pdf demos to see it. And if you ever bought 6101.1 vce dumps from us, believe you may learn a little about us, almost 100% passing rate, warm online service and strong protecting guarantee.

The latest 6101.1 practice test vce dumps

As for the virtual online product, the 6101.1 braindumps' update is a critical factor. Besides for the high quality by our Avaya masters team, they are also checking about the 6101.1 update condition everyday. Based on the change in the market, they will change rapidly. When there is the newer version, they will publish the new 6101.1 version in the site.

With hard working of all site team, our 6101.1 vce exam dumps are always the latest version in the Avaya Ethernet Routing Switch Implementation Exam tests. If you need the newer 6101.1 vce files, recommend you to leave your email for us, we will mail to you if there is the update. One of our guarantees is 1 year 6101.1 free update for dumps. After your purchase from BraindumpsVCE, our system will send you the latest brain dumps immediately in one year.

Avaya Ethernet Routing Switch Implementation Sample Questions:

1. A technician is adding the Virtual Link Aggregation Control Protocol (VLACP) configuration ID a Converged Campus Solution where all Ethernet Routing switches (ERSs) are directly connected without intermediary WAN transport devices
What are two key configuration tasks? (Choose two)

A) Configure all links to use a unique reserved multicast MAC address for VLACP messages
B) For the SMLT links, configure the long timeout value
C) configure all links to use the default multicast MAC address for VLACP messages
D) For the 1ST links, configure the long timeout value

2. An Ethernet routing switch (ERS) 4550T-PWR has been deployed with a single AC power supply and is currently supporting 20 VoIP telephones with power over Ethernet (PoE). each with a power draw of 8 Watts when offhook.The network engineer has requested the addition of 5 Wireless Access points (WAPs) to the ERS 4550T-PWR.Each WAP supports PoE and requires 12 Watts of power.
What is the outcome of the addition of the WAPs to the ERS 455QT-PWR?

A) The addition of a Redundant Power Supply 15 will be required to provide sufficient power to ensure the VoIP phones and WAP function property.
B) the power requirement of the WAP exceeds the individual port maximum power rating of the ERS 4550T-PWR and will therefore require an external power source.
C) The 4550T-PWR will have sufficient power to support the 20 VoIP telephones and 5 WAP devices,
D) The addition of a second AC power supply will be required to provide sufficient power to the ERS -4550T-PWR to Support all of-the PoE devices.

3. Which two pairs of commands will configure spanning tree on the edge switch? (Choose two)

A) 5520-24T (config) # interface fastethernet 25-26 5520-24T (config-if) # spanning tree learning disable
B) 5520-24T (config) # interface fastethernet 1-20 5520-24T (config-if) # spanning tree learning disable
C) 5520-24T (config) # interface fastethernet 25-26 5520-24T (corrfig-if) # spanning-tree learning fast
D) 5520-24T (config) # interface fastethernet 1-20 5520-24T (config-if) # spanning-tree learning fast

4. A customer has purchased some Ethernet Routing Switch (ERS) 5600 switches must integrate two ERS 5600 units into existing stack of ERS 5500 switches.
What is the procedure for the integration of the new ERS 5600?

A) With power applied to the stack, integrate one ERS into the stack as non base unit in mixed stack operational mode. Change the existing ERS 5500 base unit to "non base unit" and set the new 5600 to "base unit". Reboot the stack integrate the second ERS 5600 in mixed stack operational mode.
B) with power applied to the slack, change the existing ERS 5500 base unit to "Non Base Unit" in mixed stack operation Integrate the two new ERS 5600 to the stack with them set as "Base Unit" in mixed stack operation Reboot the stack.
C) With power applied to the stack, integrate one ERS into the stack as non base unit in mixed stack operational mode. After the two ERS 5600 units have obtained their configuration from the ERS 5500 base unit, change the ERS 5500 to "non base unit" and set one ERS 5600 to "base unit". Reboot the switch stack.
D) Remove the AC from the stack, integrate the two ERS 5600 units into the existing 5600 set to "base unit" and one ERS 5600 set to "non base unit" set the existing ERS 5500 base unit to "non base unit" apply power to stack.

5. In Ethernet Routing Switch (ERS) 5600 switch was added into the existing ERS 5500 stack, but ft did not form a proper stack.
Which statement describes the problem?

A) The ERS 5600 was set as the Base Unit.
B) The mode parameter on the ERS 5600 switch was set to Mixed Mode.
C) The ERS 5500 was set as the Base Unit.
D) The stack was reset for a change in Base Unit to take effect.

Solutions: