[Nov-2025] D-PCR-DY-01 PDF Dumps Are Helpful To produce Your Dreams Correct QA's [Q121-Q144]

[Nov-2025] D-PCR-DY-01 PDF Dumps Are Helpful To produce Your Dreams Correct QA's

New D-PCR-DY-01 exam Free Sample Questions to Practice

NEW QUESTION # 121
What is a critical requirement for installing CyberSense on a physical server?
Response:

A. Presence of a gaming graphics card
B. Adequate RAM and CPU resources
C. Use of a specific brand of server
D. Specific color configuration of server LEDs

Answer: B

NEW QUESTION # 122
In which order are commands entered to enable the firewall on the PowerProtect Cyber Recovery host so that SELinux can use it?
Response:

A. 1. vi /etc/selinux/config
B. 1. vi /etc/selinux/config
C. 1. systemctl start firewalld
D. 1. wq!

Answer: A

NEW QUESTION # 123
During a recovery operation in PowerProtect Cyber Recovery using PPDM, NetWorker, or Avamar, what are essential steps?
Response:

A. Verifying the recovery point objectives (RPO)
B. Updating the company website about the recovery
C. Testing the recovered data for integrity and functionality
D. Ensuring network connectivity is disabled

Answer: A,C

NEW QUESTION # 124
An administrator is tasked with upgrading Cyber Recovery in a vSphere environment. What key factor must be confirmed to ensure a successful upgrade?
Response:

A. Role-based access permissions
B. Network bandwidth
C. Total storage available
D. Compatibility with the current vSphere version

Answer: D

NEW QUESTION # 125
What is a key step in performing disaster recovery using Cyber Recovery tools like NetWorker or Avamar?
Response:

A. Restarting the recovery vault
B. Disabling encryption temporarily
C. Increasing storage capacity
D. Testing data integrity

Answer: D

NEW QUESTION # 126
When configuring security for PowerProtect Cyber Recovery administration, what two steps should be taken to enhance access controls?
(Choose two)
Response:

A. Setting up role-based access control (RBAC)
B. Reconfiguring the network firewall
C. Verifying backup encryption
D. Implementing MFA

Answer: A,D

NEW QUESTION # 127
You are tasked with defining security protocols for your Cyber Recovery Vault. What configuration should be implemented first to enhance security?
Response:

A. Configure direct internet access for the vault
B. Install cloud backup software
C. Set up Multi-Factor Authentication (MFA)
D. Enable real-time data analytics

Answer: C

NEW QUESTION # 128
What is the first step when installing Cyber Recovery software in a vSphere environment?
Response:

A. Verify virtual machine compatibility
B. Install backup agents
C. Enable Multi-Factor Authentication
D. Allocate sufficient storage

Answer: A

NEW QUESTION # 129
Understanding technology limitations is crucial in cyber recovery because:
Response:

A. It helps in accurate budgeting
B. It aids in identifying potential vulnerabilities
C. It allows for better marketing strategies
D. It ensures compliance with international standards

Answer: B

NEW QUESTION # 130
When CyberSense detects an anomaly during a backup, what is the first action that should be taken?
Response:

A. Delete the detected files
B. Isolate the affected files
C. Run a manual system scan
D. Restore the backup immediately

Answer: B

NEW QUESTION # 131
What is a pre-requisite for performing Automated Recovery of Dell PowerProtect Data Manager?

A. Manual Snapshot of PowerProtect Data Manager on vCenter.
B. vCenter hosting PowerProtect Data Manager is added to Dell PowerProtect Cyber Recovery.
C. Create the DDBoost users on the PowerProtect Data Manager.
D. Keep the same password on Vault PowerProtect Data Manager as production PowerProtect Data Manager.

Answer: B

Explanation:
vCenter hosting PowerProtect Data Manager must be added to Dell PowerProtect Cyber Recovery to enable automated recovery processes. This integration allows Cyber Recovery to manage and automate the recovery workflows directly through the virtual infrastructure.

NEW QUESTION # 132
When installing Cyber Recovery on a hybrid cloud environment, what should be the top priority?
Response:

A. Configuring network isolation between on-prem and cloud components
B. Scheduling backups during non-peak hours
C. Allocating maximum storage resources
D. Ensuring real-time replication

Answer: A

NEW QUESTION # 133
A common CLI tool-based approach to troubleshoot network issues in a Cyber Recovery environment is:
Response:

A. Running disk defragmentation
B. Checking the color accuracy of the display
C. Manually rewriting network configuration files
D. Using ping and traceroute commands

Answer: D

NEW QUESTION # 134
Which of the following is critical when defining a PowerProtect Cyber Recovery policy?
Response:

A. Backup application license
B. Encryption algorithm
C. Server memory allocation
D. Data retention schedule

Answer: D

NEW QUESTION # 135
When troubleshooting CyberSense, which two tools can be used to investigate delays in job progress?
(Choose two)
Response:

A. Real-time network monitoring
B. Backup encryption settings
C. Command Line Interface (CLI)
D. CyberSense system logs

Answer: C,D

NEW QUESTION # 136
What is a primary benefit of using CyberSense for backup monitoring?
Response:

A. Faster backup speeds
B. Increased storage capacity
C. Detecting anomalies and potential threats in backup data
D. Reduced system resource consumption

Answer: C

NEW QUESTION # 137
During the backup job, CyberSense detects a significant delay in policy execution time. What should the administrator investigate first?
Response:

A. Firewall configurations
B. Backup storage space
C. System resource allocation
D. Encryption settings

Answer: C

NEW QUESTION # 138
What is the main purpose of configuring sandboxes in PowerProtect Cyber Recovery?
Response:

A. For testing and validating data recovery processes in an isolated environment
B. To reduce the amount of physical storage needed
C. To provide a playful user interface for administrators
D. To enhance the aesthetic appeal of the system's UI

Answer: A

NEW QUESTION # 139
Which security consideration is essential when hardening a Cyber Recovery solution?
Response:

A. Configuring firewalls with fewer rules
B. Implementing Multi-Factor Authentication (MFA)
C. Allowing production network access
D. Granting administrative rights to all users

Answer: B

NEW QUESTION # 140
Which of the following is a crucial security consideration when hardening the PowerProtect Cyber Recovery solution?
Response:

A. Focusing solely on external threats and ignoring internal threats
B. Regularly changing the color scheme of the user interface
C. Implementing strict access controls and authentication mechanisms
D. Ensuring compatibility with all consumer-grade antivirus software

Answer: C

NEW QUESTION # 141
Before starting a Dell NetWorker recovery, the administrator needs to verify that the DDBoost user is correctly configured in both the production and Dell PowerProtect Cyber Recovery environments.
What must be confirmed about the DDBoost user to ensure a successful Dell NetWorker recovery?

A. The DDBoost user is different in the vault and production environments.
B. The DDBoost user is the same UID in both the vault and production environments.
C. The DDBoost user is configured with read-only access.
D. The DDBoost user has administrative privileges.

Answer: C

Explanation:
The DDBoost user must have the same UID in both the vault and production environments to ensure consistent authentication and seamless access during Dell NetWorker recovery operations.

NEW QUESTION # 142
What happens when the CyberSense license expires?
Response:

A. CyberSense will switch to a limited functionality mode, providing only basic monitoring
B. PowerProtect Cyber Recovery software will stop creating the PIT
C. Analyze operation will continue as usual
D. Analyze operation and alerting fail after a 90-day grace period

Answer: D

NEW QUESTION # 143
After upgrading the Cyber Recovery software on Azure, a job fails due to insufficient memory resources. What step should have been taken prior to the upgrade?
Response: